Q: My MU SpaceBot cannot be turned on.
A: Make sure the switch on the battery box is ON, and all the cables are connected to the pins with matching color . It is also recommended to use fresh batteries or fully charged rechargeable batteries.
Q: Does the package include any battery?
A: No. MU SpaceBot needs 3 AAA batteries.
Q: Where is the camera?
A: It is behind the hole in the front of the robot head.
Q: After I turn on the switch, the head of my SpaceBot is not in the center by default.
A: Please check step 8 and 9 to make sure the red mark on the servo gear is aligned with the servo arm pointing forward.
Q: Once turned on, the SpaceBot keep nodding its head with a “ding” sound.
A: This indicates the battery is low and the SpaceBot is rebooting itself because of low voltage from the battery. Try switching to a set of fresh batteries. We recommend using rechargeable batteries which hold voltage better than alkaline ones when discharging.
If you have other question, please sent your questions on MU Community http://forum.morpx.com/, or email to support@morpx.com. Thank you!
